Construction features

• Structural frame built from 304 stainless steel.
• Water spraying arms in brass (OT58) driven by one motor rated at IP55.
• Die track rollers in 304 stainless steel, driven by two motors rated at IP55.
• Two high pressure water pumps with ceramic pistons for longer life, driven indirectly by two motors rated at IP 55.
• The operating pressure is readily adjustable.
• Four intake filters in PVC plastic.
• Recirculating water is filtered and the solid waste is easily removed from a 304 stainless steel tray in the tank.
• Automatic system to open tank cover, driven by one motor and controlled by an optical sensor.
• The electric control panel is attached to the machine frame, and equipped with PLC for motion control and the programming of the washing cycles.

Technical features

• The machine is designed to wash 4 round dies with maximum diam: mm. 600x140 each.
• Pump: Two units, Interpump W12 (125 l/min. each).
• Operating pressure: 30-35 bar.
• Max. pressure: 60 bar.
• Dimensions: mm. 2420 x 1650 x 1600 (h).
• Weight: 980 kg.
• Installed electric power: 20 kW.
• Voltage and frequency: according to customers' requirements.

Options

• Spraying arms in 304 stainless steel.
• Solenoid valves and high/low limit switches for the automatic filling of the tank.
• Solenoid valves to by-pass the pump on start up.
• Ancillary washing device to rinse and sanitize the tank.
• Increased motor protection IP56 or IP66.
• Electric control panel in stainless steel.
• Electric control panel suitable for wall pedestal mounting.

The equipment is constructed to meet all EEC standards (CE certified).